diff --git a/src/footprints/choc.js b/src/footprints/choc.js
index b2c4fb7..e4e0040 100644
--- a/src/footprints/choc.js
+++ b/src/footprints/choc.js
@@ -17,8 +17,8 @@ module.exports = {
         (fp_line (start 7 -7) (end 7 -6) (layer F.SilkS) (width 0.15))
 
         ${''/* pins */}
-        (pad 1 thru_hole circle (at 0 -5.9) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${p.net_from})
-        (pad 2 thru_hole circle (at -5 -3.8) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${p.net_to})
+        (pad 1 thru_hole circle (at 5 -3.8) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${p.net_from})
+        (pad 2 thru_hole circle (at 0 -5.9) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${p.net_to})
         
         ${''/* middle shaft */}
         (pad "" np_thru_hole circle (at 0 0) (size 3.429 3.429) (drill 3.429) (layers *.Cu *.Mask))
diff --git a/src/footprints/index.js b/src/footprints/index.js
index 04b1162..4c8f311 100644
--- a/src/footprints/index.js
+++ b/src/footprints/index.js
@@ -4,5 +4,6 @@ module.exports = {
     choc: require('./choc'),
     diode: require('./diode'),
     promicro: require('./promicro'),
+    rgb: require('./rgb'),
     pad: require('./pad')
 }
\ No newline at end of file
diff --git a/src/footprints/rgb.js b/src/footprints/rgb.js
new file mode 100644
index 0000000..28f4a61
--- /dev/null
+++ b/src/footprints/rgb.js
@@ -0,0 +1,38 @@
+module.exports = {
+    static_nets: ['VCC', 'GND'],
+    nets: ['din', 'dout'],
+    params: {
+        side: 'F'
+    },
+    body: p => `
+    
+        (module WS2812B (layer F.Cu) (tedit 53BEE615)
+
+            ${p.at /* parametric position */}
+
+            (fp_line (start -1.75 -1.75) (end -1.75 1.75) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start -1.75 1.75) (end 1.75 1.75) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start 1.75 1.75) (end 1.75 -1.75) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start 1.75 -1.75) (end -1.75 -1.75) (layer ${p.param_side}.SilkS) (width 0.15))
+
+            (fp_line (start -2.5 -2.5) (end -2.5 2.5) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start -2.5 2.5) (end 2.5 2.5) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start 2.5 2.5) (end 2.5 -2.5) (layer ${p.param_side}.SilkS) (width 0.15))
+            (fp_line (start 2.5 -2.5) (end -2.5 -2.5) (layer ${p.param_side}.SilkS) (width 0.15))
+
+            (fp_poly (pts (xy 4 2.2) (xy 4 0.375) (xy 5 1.2875)) (layer ${p.param_side}.SilkS) (width 0.1))
+
+            (pad 1 smd rect (at -2.2 -0.875 ${p.rot}) (size 2.6 1) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_VCC})
+            (pad 2 smd rect (at -2.2 0.875 ${p.rot}) (size 2.6 1) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_dout})
+            (pad 3 smd rect (at 2.2 0.875 ${p.rot}) (size 2.6 1) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_GND})
+            (pad 4 smd rect (at 2.2 -0.875 ${p.rot}) (size 2.6 1) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_din})
+
+            (pad 11 smd rect (at -2.5 -1.6 ${p.rot}) (size 2 1.2) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_VCC})
+            (pad 22 smd rect (at -2.5 1.6 ${p.rot}) (size 2 1.2) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_dout})
+            (pad 33 smd rect (at 2.5 1.6 ${p.rot}) (size 2 1.2) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_GND})
+            (pad 44 smd rect (at 2.5 -1.6 ${p.rot}) (size 2 1.2) (layers ${p.param_side}.Cu ${p.param_side}.Paste ${p.param_side}.Mask) ${p.net_din})
+            
+        )
+    
+    `
+}
\ No newline at end of file
diff --git a/src/outlines.js b/src/outlines.js
index 4f2f292..e984539 100644
--- a/src/outlines.js
+++ b/src/outlines.js
@@ -237,13 +237,14 @@ exports.parse = (config = {}, points = {}) => {
                     const bevel = a.sane(part.bevel || 0, `${name}.bevel`, 'number')
                     const rect_mirror = a.sane(part.mirror || false, `${name}.mirror`, 'boolean')
                     const rect = rectangle(size[0], size[1], corner, bevel, name)
-                    arg = anchor.position(rect)
+                    arg = anchor.position(u.deepcopy(rect))
                     if (rect_mirror) {
                         const mirror_part = u.deepcopy(part)
                         a.assert(mirror_part.ref, `Field "${name}.ref" must be speficied if mirroring is required!`)
                         mirror_part.ref = `mirror_${mirror_part.ref}`
                         anchor = a.anchor(mirror_part, name, points, false)
-                        arg = u.stack(arg, anchor.position(rect))
+                        const mirror_rect = m.model.moveRelative(u.deepcopy(rect), [-size[0], 0])
+                        arg = u.union(arg, anchor.position(mirror_rect))
                     }
                     break
                 case 'circle':
@@ -257,7 +258,7 @@ exports.parse = (config = {}, points = {}) => {
                         a.assert(mirror_part.ref, `Field "${name}.ref" must be speficied if mirroring is required!`)
                         mirror_part.ref = `mirror_${mirror_part.ref}`
                         anchor = a.anchor(mirror_part, name, points, false)
-                        arg = u.stack(arg, u.circle(anchor.p, radius))
+                        arg = u.union(arg, u.circle(anchor.p, radius))
                     }
                     break
                 case 'polygon':
diff --git a/src/pcbs.js b/src/pcbs.js
index b1825c7..3383fb6 100644
--- a/src/pcbs.js
+++ b/src/pcbs.js
@@ -206,12 +206,16 @@ exports.parse = (config, points, outlines) => {
     for (const [pcb_name, pcb_config] of Object.entries(pcbs)) {
 
         // config sanitization
-        a.detect_unexpected(pcb_config, `pcb.${pcb_name}`, ['edge', 'footprints'])
-        const edge = outlines[pcb_config.edge]
-        if (!edge) throw new Error(`Field "pcb.${pcb_name}.edge" doesn't name a valid outline!`)
+        a.detect_unexpected(pcb_config, `pcb.${pcb_name}`, ['outlines', 'footprints'])
 
-        // Edge.Cuts conversion
-        const kicad_edge = makerjs2kicad(edge)
+        // outline conversion
+        const config_outlines = a.sane(pcb_config.outlines, `pcb.${pcb_name}.outlines`, 'object')
+        const kicad_outlines = {}
+        for (const [outline_name, outline] of Object.entries(config_outlines)) {
+            const ref = a.in(outline.outline, `pcb.${pcb_name}.outlines.${outline_name}.outline`, Object.keys(outlines))
+            const layer = a.sane(outline.layer || 'Edge.Cuts', `pcb.${pcb_name}.outlines.${outline_name}.outline`, 'string')
+            kicad_outlines[outline_name] = makerjs2kicad(outlines[ref], layer)
+        }
 
         // making a global net index registry
         const nets = {"": 0}
@@ -247,12 +251,13 @@ exports.parse = (config, points, outlines) => {
         const netclass = kicad_netclass.replace('__ADD_NET', add_nets_arr.join('\n'))
         const nets_text = nets_arr.join('\n')
         const footprint_text = footprints.join('\n')
+        const outline_text = Object.values(kicad_outlines).join('\n')
         results[pcb_name] = `
             ${kicad_prefix}
             ${nets_text}
             ${netclass}
             ${footprint_text}
-            ${kicad_edge}
+            ${outline_text}
             ${kicad_suffix}
         `
     }
diff --git a/test/fixtures/absolem.yaml b/test/fixtures/absolem.yaml
index 1968959..947dab9 100644
--- a/test/fixtures/absolem.yaml
+++ b/test/fixtures/absolem.yaml
@@ -559,7 +559,7 @@ outlines:
         glue: uniform_s19
         size: 14
         bound: false
-    classic_s19_middle:
+    pcb_middle:
       raw:
         type: keys
         side: middle
@@ -573,32 +573,26 @@ outlines:
         size: [25, 5]
         ref: thumbfan_home_thumb
         shift: [0, 12]
+        mirror: true
       helper2:
         type: rectangle
         size: [25, 5]
         ref: thumbfan_far_thumb
         shift: [-25, 12]
-      helper3:
-        type: rectangle
-        size: [25, 5]
-        ref: mirror_thumbfan_home_thumb
-        shift: [25, 12]
-      helper4:
-        type: rectangle
-        size: [25, 5]
-        ref: mirror_thumbfan_far_thumb
-        shift: [0, 12]
+        mirror: true
       outer_bounds:
         type: outline
         name: classic_s19_outline
         operation: intersect
-      mounting_holes:
-        type: outline
-        name: mounting_holes
-        operation: stack
 pcbs:
   main:
-    edge: intersected_outline
+    outlines:
+      edge:
+        outline: intersected_outline
+        layer: Edge.Cuts
+      middle:
+        outline: pcb_middle
+        layer: F.SilkS
     footprints:
       mcu:
         type: promicro
@@ -634,3 +628,13 @@ pcbs:
           width: 3
           height: 3
           front: false
+      led:
+        type: rgb
+        anchor:
+          ref:
+            - matrix_inner_bottom
+            - mirror_matrix_inner_bottom
+          shift: [0, -48]
+        nets:
+          din: 'P9'
+          dout: ''