final?

poempl.yaml

@@ -8,12 +8,8 @@ esphome:
       - light.turn_on:
           id: bar
           brightness: 20%
-          red: 0
-          green: 0
-          blue: 20%
+          effect: meter
            
-
-
 # Enable logging
 logger:
 
@@ -50,23 +46,39 @@ light:
     rgb_order: GRB
     name: Bar
     effects:
-      - strobe
-  - platform: partition
-    name: bar00
-    segments:
-      - id: bar
-        from: 0
-        to: 0
-    effects:
-      - strobe
-  - platform: partition
-    name: bar01
-    segments:
-      - id: bar
-        from: 1
-        to: 1
-    effects:
-      - strobe
+      - addressable_lambda:
+          name: "meter"
+          update_interval: 100ms
+          lambda: |-
+            int val = ((id(bme280_pressure).state - 900) * 0.08) - 4;
+
+            Color red = Color((uint8_t)255, (uint8_t)0, (uint8_t)0, (uint8_t)51);
+            Color yellow = Color((uint8_t)255, (uint8_t)255, (uint8_t)0, (uint8_t)51);
+            Color green = Color((uint8_t)0, (uint8_t)255, (uint8_t)0, (uint8_t)51);
+
+            it.range(0, 9) = Color::BLACK;
+
+            if (val < 3) {
+              it.range(0, val+1) = red;
+            } else {
+              it.range(0, 3) = red;
+            }
+
+            if (val >= 3) {
+              if ( val < 6) {
+                it.range(3, val+1) = yellow;
+              } else {
+                it.range(3, 6) = yellow;
+              }
+            }
+
+            if (val >= 6) {
+              if ( val < 9) {
+                it.range(6, val+1) = green;
+              } else {
+                it.range(6, 9) = green;
+              }
+            }
 
 sensor:
   - platform: bme280
@@ -76,23 +88,8 @@ sensor:
     pressure:
       name: "BME280 Pressure"
       id: bme280_pressure
-      on_value:
-        - then:
-            - light.addressable_set:
-                id: bar
-                red: 20%
-                green: 0
-                blue: 0
-                white: 20%
-                range_from: 0
-                range_to: !lambda |
-                  int val =  (id(bme280_pressure).state - 900) * 0.08;
-                  ESP_LOGD("main", "value %d", val);
-                  return val - 3;
-
-      
     humidity:
       name: "BME280 Relative Humidity"
       id: bme280_humidity
     address: 0x76
-    update_interval: 0.5s
+    update_interval: 5s