esphome:
  name: poempl
  platform: ESP8266
  board: nodemcuv2

  on_boot:
    priority: 300
    then:
      - light.turn_on:
          id: bar
          brightness: 100%
          effect: meter
           
# Enable logging
logger:

ota:
  password: "VkkVfr9C0C6lGxmc"

wifi:
  ssid: "backspace IoT"
  password: "InternetOfShit!"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Poempl Fallback Hotspot"
    password: "FP6GohMzor5x"

captive_portal:

i2c:
  sda: D2
  scl: D1
  scan: true
  id: bus_a

mqtt:
  broker: mqtt.core.bckspc.de
  discovery: false

light:
  - platform: fastled_clockless
    chipset: WS2812B
    id: bar
    pin: D4
    num_leds: 9
    rgb_order: GRB
    name: Bar
    effects:
      - addressable_lambda:
          name: "meter"
          update_interval: 10ms
          lambda: |-
            int val = ((id(bme280_pressure).state - 900) * 0.08) - 4;
            if (val < 0) {
              val = 0;
            } else if (val > 8) {
              val = 8;
            } 

            Color red = Color((uint8_t)192, (uint8_t)0, (uint8_t)0, (uint8_t)255);
            Color yellow = Color((uint8_t)128, (uint8_t)128, (uint8_t)0, (uint8_t)255);
            Color green = Color((uint8_t)0, (uint8_t)192, (uint8_t)0, (uint8_t)255);

            it.range(0, 9) = Color::BLACK;

            if (val < 3) {
              it.range(1, val+2) = red;
            } else {
              it.range(1, 4) = red;
            }

            if (val >= 3) {
              if ( val < 6) {
                it.range(4, val+2) = yellow;
              } else {
                it.range(4, 7) = yellow;
              }
            }

            if (val >= 6) {
              if ( val < 9) {
                it.range(7, val+2) = green;
              } else {
                it.range(7, 10) = green;
              }
            }

sensor:
  - platform: bme280
    temperature:
      name: "BME280 Temperature"
      id: bme280_temperature
    pressure:
      name: "BME280 Pressure"
      id: bme280_pressure
    humidity:
      name: "BME280 Relative Humidity"
      id: bme280_humidity
    address: 0x76
    update_interval: .2s